Specifications:

• The resistance of conductive rubber (which is to be used as floor surface) to earth must be less than 50 X 10 3 ohm.
• Thickness is 2mm up to 20 mm in range available.
• It should provide a continuous electrical path to the static ground system and the electrical resistance should not exceed 10 6 ohm.

 Technical Specifications:

• The resistance of conductive rubber (which is to be used as floor surface) to earth must be less than 50 X 10 3 ohm.
• It should provide a continuous electrical path to the static ground system and the electrical resistance should not exceed 10 6 ohm.
• The maximum resistance of a body + the resistance of the conductive shoe + the resistance of the conductive rubber to the ground system should not exceed 10 6 ohms total.
• It should provide a reasonably smooth surface that is free from cracks.
• Thickness is 2mm up to 20 mm in range available.
• The rubber should not produce any kind of foul smell.
• The conducting rubber which is to be used as floor should not be slippery.
• The rubber surface should not have rough surface so that dust and other particles may get accumulated.
• Warranty: Warranty against crack and damage at east for one year.